产品
Rack Mounted 发射机s VHF / UHF (12-49-0000)
The 12-49 series of 19" x 1U rack mountable transmitters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 25 watts.
By adding a power amplifier within the 1U rack the unit becomes a powerful 25W output telemetry transmitter.
Available protocols includes:
Salcom, TAP (PET), Scope, Comp1, Comp2, TNPP, ESPA4.4.4, Ascom, Austco, Match, Gent, SMS, Gaming, GPS & 脉冲计数.
Salcom has further developed its range of rack systems in order to provide off-the-shelf 1U 19 inch solutions for telemetry.
These racks provide a conveniently packaged selection of standard Salcom core products that can easily be added to your server rack.
The 12-49 series of transmitters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts, with 25W output also being a configurable option .
They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.
In addition to a direct/RS232 buffered serial port, an on-board USB端口 enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.
The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, 十大网堵平台 Entry Protocol (PET) or Telocator Alphanumeric Protocol (TAP) PG1 protocol. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB端口.
四个离散输入 are supported which may be used to initiate relay commands for remote control applications.
Configuration of the transmitter is performed via the USB端口 or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.
The 12-49 is housed in an attractive 19" x 1U rack.
Please also see the 12-49 Repeater options in the Transceivers/Repeaters product section.
| 模型 | 12-62-0000 VHF/UHF 发射机 |
| 频率范围VHF | 148 - 164 MHz - VHF (模型 No. 12-62-00150) |
| 频率范围UHF | 427.5 - 475 MHz UHF (模型 No. 12-62-0450) |
| 频率Selecion | 用户可配置的 |
| 电力供应 | +13.8V typical (11-15 VDC range) |
| 电力消耗 | 低功耗模式:17.5mA 马备用:40 传输:1.2A @ 4W |
| 传输能量 | 5W, 2W, 1W, 500mW, 250mW, 100mW, 50mW |
| 信道间隔 | 5 khz, 6.25 khz, 10kHz, 12.5 khz, 25 khz |
| 调制 | FSK与NRZ数据 |
| 偏差 | ±2.25 khz或±4.5 khz |
| 发射占空比 | 50%; Maximum 5 minutes on time |
| 波特率 | 512,1200 |
| 消息格式 | POGSAC |
| Configuration Application | 12-62 Configuration Tool |
| 编程电缆 | 迷你USB 12-45-0000 (RJ12 to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
Salcom has further developed its range of rack systems in order to provide off-the-shelf 1U 19 inch solutions for telemetry.
These racks provide a conveniently packaged selection of standard Salcom core products that can easily be added to your server rack.
The 12-49 series of transmitters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts, with 25W output also being a configurable option .
They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.
In addition to a direct/RS232 buffered serial port, an on-board USB端口 enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.
The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, 十大网堵平台 Entry Protocol (PET) or Telocator Alphanumeric Protocol (TAP) PG1 protocol. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB端口.
四个离散输入 are supported which may be used to initiate relay commands for remote control applications.
Configuration of the transmitter is performed via the USB端口 or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.
The 12-49 is housed in an attractive 19" x 1U rack.
Please also see the 12-49 Repeater options in the Transceivers/Repeaters product section.
| 模型 | 12-62-0000 VHF/UHF 发射机 |
| 频率范围VHF | 148 - 164 MHz - VHF (模型 No. 12-62-00150) |
| 频率范围UHF | 427.5 - 475 MHz UHF (模型 No. 12-62-0450) |
| 频率Selecion | 用户可配置的 |
| 电力供应 | +13.8V typical (11-15 VDC range) |
| 电力消耗 | 低功耗模式:17.5mA 马备用:40 传输:1.2A @ 4W |
| 传输能量 | 5W, 2W, 1W, 500mW, 250mW, 100mW, 50mW |
| 信道间隔 | 5 khz, 6.25 khz, 10kHz, 12.5 khz, 25 khz |
| 调制 | FSK与NRZ数据 |
| 偏差 | ±2.25 khz或±4.5 khz |
| 发射占空比 | 50%; Maximum 5 minutes on time |
| 波特率 | 512,1200 |
| 消息格式 | POGSAC |
| Configuration Application | 12-62 Configuration Tool |
| 编程电缆 | 迷你USB 12-45-0000 (RJ12 to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
